bonvepumps

  Bonve  has been involved in the food industry for more than ten years, and has accumulated a lot of experience and successful cases. Bonve offered targeted and reliable pump solutions for your application, aim to solve the pumping problem you meet. Bonve rotary lobe pumps   are widely used in the food industry, mainly because of the following characteristics: High sanitation: The wetted parts are manufactured in stainless steel 316 or 316L. High smoothness: surface roughness is below 0.8μm, confirming to 3A, EHEDG, FDA standard. Meet CIP and SIP requirements. Simple disassembly and assembly, easy maintenance and few wearing parts. Low speed, low shear, no damage. Typical mediums transferred: Chocolate, concentrated milk, yogurt, honey, syrup, sucrose, ketchup, tomato paste, concentrated juice, jam, ice cream, milk, yeast syrup, meat slurry, jelly, condiments, soy protein etc. Pump details pls  click here  to learn more. Working in a food factory to proces...

When a  Bonve lobe pump   is to be incorporated in a system, it is considered good practice to, as far as possible, minimize the length of the pipes and the number of pipe fittings. When designing the suction lines, particular care should be taken. The pump shall be installed below the storage tank and keep the inlet pipe as short and straight as possible. Always consider the following when designing a system: ​ 1. Ensure there is space enough around the pump to allow for: A) Routine check and maintenance of the complete pump unit, drive motor, etc. B) Good ventilation for the drive to avoid overheating. 2. Both the suction and the discharge ports shall be provided with valves. During check-up procedures or maintenance work, the pump must be isolated from the system 3. The system design, pipes and other equipment shall have independent supports to avoid heavy loads on the pump. In the case of pipe work or other equipment relying o...